Need help?Do you have a question about the Morningstar SUNSAVER MPPT Series and is the answer not in the manual?
General| Series | SUNSAVER MPPT |
|---|---|
| Efficiency | 98% |
| Temperature Range | -40°C to +60°C |
| Output Voltage | 12V/24V |
| Maximum Output Current | 15A |
| Protection | short circuit |
| Dimensions | 120 x 60 mm |
Precautions for safe installation of the SunSaver-MPPT indoors and regarding battery handling.
Introduction to the SunSaver MPPT as an advanced solar battery charger and load controller.
Explanation of the features of the SunSaver MPPT, illustrated with a diagram.
Description of available optional accessories like Remote Temperature Sensor and Remote Meter.
Information on EMC standards, installation requirements, and FCC compliance.
General notes and precautions to follow before beginning the installation process.
Details on configuring the SunSaver MPPT using settings switches and battery select jumper.
Instructions and precautions for mounting the SunSaver-MPPT controller in a suitable location.
Guidance on connecting the load, battery, and solar array to the SunSaver-MPPT.
Explanation of the Status LED and Battery SOC LEDs and their meanings.
Details on the TrakStar MPPT technology for maximizing solar energy harvest.
Description of the 4-stage battery charging algorithm and equalization process.
Information on the load control function, LVD/LVR settings, and current compensation.
Overview of the controller's protection mechanisms against various faults and overloads.
Recommended inspection and maintenance tasks for optimal controller performance.
Instructions for programming custom charging and load control set-points using PC software.
Lists and explains Status LED and Battery Status LED error indications.
Provides common problems and their solutions for troubleshooting the controller.
Table listing battery setpoints for different battery types at 25°C.
Graphs showing SS-MPPT efficiency curves for 12V and 24V systems.
To Next Page