To Next PageTo Next Page
Need help?Do you have a question about the Morningstar SunSaver SS-10L and is the answer not in the manual?
General| Model | SS-10L |
|---|---|
| Rated Current | 10A |
| Nominal System Voltage | 12V |
| Operating Temperature Range | -40°C to +60°C |
| Display | LED Indicators |
| Low Voltage Reconnect | 12.6V |
| Type | Solar Charge Controller |
| Battery Type Compatibility | Flooded, Gel |
| Protection Features | Reverse Polarity, Overload, Short Circuit |
| Weight | 0.5 lbs |
Crucial safety guidelines for installation and operation to prevent damage or injury.
Compliance and procedures for installing the SunSaver in hazardous classified locations.
Maximum voltage, current, and overload capabilities of the SunSaver controller.
Importance of correct polarity and controller's protection against reverse connections.
Step-by-step guide for physically installing the SunSaver controller.
Manual actions required from the user for operating the controller.
Detailed explanation of the controller's internal functions and design features.
Recommended annual checks and upkeep for optimal controller performance.
Method for verifying controller operation using an external power source.
Guides for diagnosing and resolving typical problems like no charging or load issues.
Specific steps to identify why the battery is not receiving charge.
Procedures for addressing situations where battery voltage is excessively high.
Steps to troubleshoot when the connected load fails to work properly.
