EasyManua.ls Logo

Morphy Richards AC9P022AP-S00F - Installation; Placement and Ventilation Requirements; Minimum Installation Height; Cable Hazard Prevention

Morphy Richards AC9P022AP-S00F
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
This microwave is designed to be free standing and is not
intended to be used ‘built in’ or in a cabinet.
Select a level surface away from televisions, cookers and
other heat producing appliances.
Ensure adequate ventilation and allow a clearance of
at each side of the oven20cm
0cm clearance above the oven3
0cm at the rear of the oven
The minimum installation height is 85cm
Ensure that the cable is not close to any sharp or hot
surfaces, or where it is likely to cause a trip hazard.
20cm
30cm
20cm
min85cm
0cm
ISSUE 1 23/08/2021
7

Related product manuals