clothes, curtains, etc. Hold the iron between 1cm and 2cm away
from the item and press the steam boost button (3).
Anti-drip system
This prevents water escaping from the soleplate (6) when the iron
is too cold.
During use, the anti-drip system may emit a loud click, particularly
during heat-up or whilst cooling down. This is perfectly normal
and indicates that the system is functioning correctly.
Life long anti-scale system (certain models only)
This system reduces scale deposits and helps prolong the life of
the iron.
Auto shut-off (certain models only)
The iron will automatically shut down if stationary in the horizontal
position for 1 minute, or in the vertical position for 8 minutes.
When auto shut-off is activated, the indicator light (4) will flash.
Gently move the iron and it will reheat. Wait for the iron to heat-up
and continue ironing.
Maintenance
To clean a stainless steel soleplate
We recommend using a generally available gentle chrome, silver
or stainless steel cleaner. Always follow the manufacturer’s
instructions.
To clean a coated soleplate
Do not use scouring powder or solution as this could cause
damage to the coating.
To clean either soleplate type
If any man-made fibres fuse to the soleplate (6), set the iron at the
3-dot position for a stainless steel soleplate, or MAX position for a
coated soleplate, and pass it over a clean piece of cotton to draw
the deposit off the surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp cloth and mild
detergent, then wipe dry.
Emptying and Storage
7
When you have finished ironing, unplug and empty all water from
your iron and set the steam switch at the
‘ ’
position. When
cool, store the iron on its heel with the cord wrapped loosely
around the heel.
Self Clean
Your iron has a built in cleaning system designed to keep the water
valve, steam chamber and steam vents clear of lint and loose
mineral deposits.
1 Half fill the iron with water.
2 Place the iron on its heel.
3 Move the variable steam switch (1) to the ‘MAX’ position.
4 Connect to a mains supply outlet.
5 Set the temperature dial (9) to ‘MAX’. See step 2 of ‘Using your
iron for steam ironing’.
6 The temperature indicator light (10) will illuminate until the required
temperature is reached, then it will turn off. Wait for one more cycle
- the temperature indicator light illuminates and switches off.
7 Disconnect the iron from the mains supply outlet.
8 Whilst the iron is still very hot, hold the iron horizontally over a sink.
9 Whilst still holding the variable steam switch (1) in the self clean
position, gently move the iron back and forth until the water tank is
empty.
WARNING: Steam and boiling hot water will drain from the
holes in the soleplate. This washes away the scale and
minerals that have built up inside the steam chamber.
10 When cleaning is complete, move the variable steam switch back
to the ‘O’ position.
11 Rest your steam iron back on its heel and allow to fully cool down.
12 Wipe the soleplate (6) with a cold, damp cloth.
After this cleaning operation, empty out any remaining water.
WARNING: Keep hands and body away from the hot water.
WARNING: Do not attempt to descale the soleplate with
descaling products.
Contact us
Helpline
If you are having a problem with your appliance, please call our
Helpline, as we are more likely to be able to help than the store
you purchased the item from. Please have the product name,
model number and serial number to hand when you call to help
us deal with your enquiry quicker.
Talk to us
If you have any questions or comments, or want some great
tips to help you get the most out of your products, join us
online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: www.twitter.com/loveyourmorphy
Website: www.morphyrichards.com
THIS SECTION IS ONLY APPLICABLE FOR
CUSTOMERS IN UK AND IRELAND
REGISTERING YOUR TWO YEAR GUARANTEE
Your standard one year guarantee is extended for an additional
12 months when you register the product within 28 days of
purchase with Morphy Richards. If you do not register the
product with Morphy Richards within 28 days, your product is
guaranteed for 1 year. To validate your 2 year guarantee register
with us online at www.morphyrichards.co.uk
N.B. Each qualifying product needs to be registered with
Morphy Richards individually. Please refer to the one year
guarantee for more information.
YOUR ONE YEAR GUARANTEE
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference. Please quote the following information if the product
develops a fault. These numbers can be found on the base of
the product.
Model no.
Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
6
To Next Page
Loading...
