Electrical requirements
Check that the voltage on the rating plate of
your appliance corresponds with your house
electricity supply which must be A.C. (Alternating
Current).
If the socket outlets in your home are not
suitable for the plug supplied with this appliance,
the plug should be removed and the appropriate
one fitted.
WARNING: The plug removed from the
mains lead, if severed, must be destroyed as a
plug with bared flexible cord is hazardous if
engaged into a live socket outlet.
WARNING: THIS APPLIANCE MUST
BE EARTHED
Should the fuse in the 13 amp plug require
replacement, a BS1362 13 amp fuse must be
fitted.
Components of your
iron
⁄
Temperature control dial
¤
Temperature indicator light
‹
Water filler hole
›
Soleplate
fi
Spray button (certain models only)
fl
On-off steam button
‡
Water tank viewing window
3
Instructions for use
Temperature Guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
⁄
‹
fi
‡
fl
›
¤
Symbol 67 8 9
(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot
Control knob Do not iron ● ●● ●●●
positions at all
Fabric Nylon, Acetates Wool, Polyester Cotton, Linen
E.g. Acrilan mixtures e.g. Rayon, Rayon
Courtelle, Orlon, Polyester/Cotton mixtures,
Triacetates, e.g. e.g. Rayon/Linen
Tricel/Polyester
Ironing Iron on wrong side. Fabrics requiring
If moisture required this setting usually
use damp cloth require steam
(Not Acetate) pressing for heavy
cotton, denim etc
With water in tank Dry and Spray Steam/spray
Without water in tank Dry ironing
To Next Page
Loading...
