5
Steam ironing
Ensure that the temperature control dial is set
in the steam range B and that there is water in
the tank. Rest the iron on its heel and let it heat
up. Before you start ironing, slide the steam
button up to the steam
position D.
If you need to refill the
water tank during use, unplug
the iron and follow the filling
instructions taking care not to
spill any water over the iron.
Emptying and storing
When you have finished
ironing unplug your iron.
Ensure that the steam button
is down, in the ‘Steam off’
position E and empty any
remaining water out of the
filler hole F.
Do not store in the box, but in an upright
position, so that any drops of water remaining
cannot leak out and discolour the soleplate. Your
iron has a cable tidy feature.
To clean an aluminium soleplate
To keep the soleplate of your iron clean and
free of limescale, make a paste of mild scouring
powder and a little water. Apply a small amount
to the soleplate, rub and then remove with a
damp cloth. Wipe thoroughly with a clean cloth.
To clean the exterior
Allow to cool and wipe over with a damp
soapy cloth, then dry with a clean dry cloth.
D
F
E
Steam on
Steam off
To Next Page
Loading...
