Morphy Richards Total Control - Reheat Function Operation

11
How To Use Reheat Function
1
Ensure the Total Control Soup Maker is
unplugged from the mains. Remove the Lid
(4), be careful not to touch the Serrator Blade
(8). WARNING: Sharp Blade.
4
START
STOP
PORTIONMODE
P
M
Press the Mode Button (22) until the Reheat
Function Indicator (18) is highlighted. Press
the Portion Button (24) to select your portion
size (2, 3 or 4).
When finished, the Total Control Soup Maker
will beep for 10 seconds. Unplug from the
mains, remove the Lid
(4) and serve.
5
START
STOP
PORTIONMODE
PM
Press the Start/Stop Button (23) and the
processing time will countdown on the
LED screen (21) .
3
Place the Lid (4) back onto the Jug Body (10)
ensuring it is securely in place. Plug the Total
Control Soup Maker into the mains.
2
Place the home made soup you would like to
reheat into the Removable Vessel (7). 2
portions minimum, 4 portions maximum.
6
NOTE: The correct portion size must be selected on the control panel to match with the
portions of soup added, failure to do this will not heat the soup to the correct temperature.
Soup consistency may vary after the reheat process.
When reheating chunkier soups the soup will become smoother in consistency.
501020 Rev 1.qxp_Layout 1 26/08/2016 09:54 Page 11