14
T
he Total Control Soup Maker has a Pre-Clean
Function
(20). See page 13. Please note:
Pre-Clean only helps to clean the Removable
V
essel base
(
7)
.
Additional cleaning may be
required.
T
he Total Control Soup Maker is not dishwasher
s
afe, but it is simple and easy to clean.
After use, simply wipe the Motor Housing
(6) and
Serrator Blade (8) with warm soapy water, and
dry.
DO NOT immerse lid or jug body in water.
The Total Control Soup Maker Removable Vessel
(7) may be removed from the Jug Body (10) for
cleaning. Simply press the Vessel Release Button
(9) and remove. Simply hand wash the
Removable Vessel (7) with warm soapy water and
wipe the Jug Body with a soft, damp cloth.
Ensure the Removable Vessel contacts are dried
carefully after washing. To refit the Removable
Vessel into the Jug Body, ensure it is correctly
aligned and then press into place.
Certain food types can burn if in contact
with the base heating element. If this
happens select the Pre-Clean Function.
If staining persists this is discolouration
and will remain. It will not affect the
performance or quality of the food
produced. Do not use abrasive scouring
pads on the Total Control Soup Maker or
damage may occur.
Occasionally it will be necessary to remove the
Lid Seal
(3) for cleaning. Wash with hot soapy
water, rinse and dry carefully before replacing.
WARNING: DO NOT immerse the Lid or Jug
Body in water, as they contain electrical
components that can be damaged by water.
Do not allow water to get onto the electrical
connections.
Dry thoroughly before use.
A Dream To Clean Removing & Replacing the Seal
To Next Page
Loading...
Need help?
General
Weight and Dimensions
