Dry ironing
Your iron can be used for dry ironing. Set the
v
ariable steam switch
(
1)
t
o ‘O’ and set the
temperature as desired (see ‘Temperature Guide’
on page 3).
Y
ou won’t need water in the tank unless using
the water spray or steam boost features
.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Hold the iron
between 1cm and 2cm away from the item and
press the steam boost button
(3).
Anti-drip system
This prevents water escaping from the soleplate
(
8)
w
hen the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
d
own. This is perfectly normal and indicates that
the system is functioning correctly
.
Anti-scale system
This system reduces scale deposits and helps
prolong the life of the iron
.
Auto shut-off
The iron will automatically shut down if stationary
in the horizontal position for 1 minute, or in the
vertical position for 8 minutes.
When auto shut-off is activated, the indicator
light
(4)
will flash.
Gently move the iron and it will reheat. Wait for
the iron to heat-up and continue ironing
.
5
Features of your iron
To Next Page
Loading...
