IMPORTANT SAFETY INFORMATION
While operating the saw:
• Always use the safety glasses and hearing protection
provided, or their equivalent, when using this saw.
A ying chip could cause blindness. Cutting noise
could seriously impair hearing.
• Never use the tool without the original protection
guard system. Ensure that moveable guards operate
freely without restrictions.
• Do not try to defeat any safety device. Do not lock
the moving guard in the open position.
• Ensure that the cutting depth adjustment
handle/angle adjustment handle and parallel blade
guide are rmly xed while using the tool.
• Support the work piece properly. Never hold the
work piece in your hand or put it across your legs.
• Always use both hands to operate the saw.
Keep hands out of path of blade.
• Never reach around, under or behind the saw blade
when operating the machine. The guard cannot
protect your hand if you do so.
• Do not touch the blade while it is in motion. Do
not try to stop the blade by lateral pressure on
the blade.
• Never reach for a saw blade until the blade has
completely stopped rotation and the machine has
been disconnected from the power source.
• When cutting wood, use suitable dust extraction and
breathing apparatus.
• Remove the plug from main power supply before
replacing the blade, making adjustments or
performing other maintenance work.
• Always keep the power cord away from the moving
parts of the tool.
• In case of saw jamming, immediately switch off the
saw and disconnect the plug. Remove the saw from
the material and inspect the blade for damage.
• Use only the anges and washers that are supplied
with the tool. Replace them with original (OEM)
replacement parts if they become damaged or
scored.
• When storing the tool, switch off the motor, unplug
the cord from the power source and ensure that all
moving parts have come to a complete stop.
3
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE!
To Next Page
Loading...