morse CSM9NXTB Metal Devil User Manual

248014
IMPORTANT! The Metal Devil saw you have purchased is a well–made tool. Used according to the directions it
will give you excellent service for a number of metal-cutting applications. Misuse of this tool, however, could result in
serious or fatal injury. Please read these operating and safety instructions carefully and completely. Read, understand
and follow all safety information. If you are uncertain about any aspect of using this equipment contact your distributor.
THE M. K. MORSE COMPANY | CANTON, OHIO U.S.A. | www.mkmorse.com | SAW MADE IN TAIWAN
INSTRUCTIONS AND SAFETY MANUAL
MODEL: CSM9NXTB /100977
SERIAL # ______________________________________
(FOR YOUR FUTURE REFERENCE PLEASE WRITE IN SERIAL # LOCATED ON MACHINE LABEL)
9” (230mm) STEEL CUTTING CIRCULAR SAW

morse CSM9NXTB Metal Devil Specifications

General

Brand	morse
Model	CSM9NXTB Metal Devil
Category	Saw
Language	English

Summary

IMPORTANT SAFETY INFORMATION

Safety Before Beginning Work

Essential safety checks before starting operation.

Safety While Operating Saw

Critical safety practices during saw operation.

MACHINE PREPARATION and OPERATION

Blade Removal and Installation

Step-by-step guide for replacing the saw blade.

Sight Line Notch and LED Light

Using the sight line notch and LED for cutting guidance.

Making a Cut and Blade Guard Lever

Proper cutting technique and blade guard lever function.

Cutting Depth Adjustment

How to set the appropriate blade cutting depth.

Laser Sight Guide System and Alignment

Operating and aligning the laser sight guide.

Bevel Cutting Adjustments

Adjusting the saw for angled (bevel) cuts.

Parallel Blade Guide Setup

Setting up the parallel guide for consistent cuts.

Chip Collection and Removal

Managing and emptying the chip collection system.

Machine Lubrication and Oil Change

Information on lubricating the saw and changing its oil.

Tool Overload Protection Reset

How to reset the tool's overload protection.

TROUBLESHOOTING

Saw Will Not Start

Diagnosing and resolving issues when the saw fails to power on.

Poor Cut Quality Issues

Addressing problems leading to suboptimal cut quality.

Unusual Sound and Sparking

Troubleshooting unusual noises and excessive sparking.

CSM9NXTB REPLACEMENT PARTS

METAL DEVIL BLADES