Morso 1010 - Page 21

21
In situations where the stove is to be tted into a brick or non-combustible recess,
we recommend that the stove is installed with at least 10 - 15 cm clearance to the wall, this will
allow heat to circulate around the stove; also the maintenance of the outside stove is easier.
When applied to masonry, a layer of wallpaper is normally classied as a
non-combustible surface.
On the oor
National and Local Building Regulations must again be observed when considering the type, thick-
ness and area of the hearth to be used in the installation. Max Hearth temperature under safety test
was 45°C. One should of course always make certain that the underlying oor surface can bear the
weight of the stove.
Distance to furniture and soft furnishings
We recommend that the stove be installed 800 mm from furniture. Serious consideration
should also be given to positioning of any furniture that could be adversely aected by heat.
The clearances to combustible materials in front of the stove should be a minimum of 800
mm. When lit, a wood-burning stove gets hot and therefore adequate protect must be pro-
vided, particularly in situations where there is a safety risk to children or the inrm. A suita-
ble safety guard around the stove should be considered.
e stoves handle also gets hot when the stove is lit, which is why a safety glove is included with the
stove.
Minimum clearances to combustible surfaces:
Stove type Behind the stove (A)
To the sides of the
stove (B)
Corner
Morsø 1010 300 mm* 450 mm 350 mm
* the distance can be reduced to 150 mm using insulated ue pipe
B
A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1400
RSV
03.12.2009
A4
Dimension Skecth
Date of print: 03-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1400-345 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 1 of 4
B
B
45°
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1400
RSV
03.12.2009
A4
Dimension Skecth
Date of print: 04-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1400-345 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 2 of 4
C
C