Morso 7840 - Routine Stove Maintenance; External Maintenance; Internal Maintenance

15
Sprog
3.1 External maintenance
The cast surface of the stove is painted with heat-resistant Senotherm paint. It is best
maintained by simply vacuuming it with a soft brush attachment or wiping it down with a
dry, dust-free cloth.
If the stove is used too vigorously, the painted surface may assume a greyish tinge over
time, but the stove can easily be freshened up with Morsø spray paint, which is available
from your local retailer. Morsø stoves are painted using a Morsø Original Black (previously
called Morsø dark grey) or Morsø grey. The paint can be bought in a spray or a can.
3.2 Internal maintenance
A few drops of mineral oil applied to the door latch may be required from time to time
if it becomes dicult to open or close the door.
Please see the drawing below:
Glass window
If the stove is used correctly, very little or no soot will be deposited on the ceramic glass
window. If soot does form on the glass as the stove is being lit, it will burn away once nor-
mal combustion begins in the stove. If the glass window becomes thoroughly covered in
soot due to incorrect operation, the soot can be easily removed using Morsø Glass Cleaner.
The glass must be cold when you clean it. Avoid stoking the stove with pieces of wood that
are so long that they press against the glass window when the door is closed.
Only use Morsø Glass Cleaner.
Ceramic glass replacement
Ceramic glass cannot be recycled because it has a higher melting point that ordinary glass. If cera-
mic glass is mixed with ordinary glass, the raw material is spoiled, and the reclaiming process may
be halted. Take care that the ovenproof glass does not end up among ordinary recycled waste.
3.0 Routine stove maintenance
Reasons for sooty glass window:
- The fuel is too wet
- The pieces of fuel are too big/uncut wood
- The combustion temperature is too low
- There is not enough air
Revisions
Rev.
Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:5
Smørretegning
Morsø 7900
RSV
2011.09.07
Constructional Drawing
A4
169752.62
Date of print: 29-11-2012
17.08.2012
U:\udv\Tegninger\7900\7900 Assembly.SLDASM
7900-138 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date: