What to do if Mortara ELI 10 Rx says ELI 10 NOT PROPERLY DOCKED?
To resolve the 'ELI 10 NOT PROPERLY DOCKED' error on your Mortara Medical Equipment, apply slight pressure to the top of the electrocardiograph ensuring a proper seat in the docking station.
What to do if Mortara ELI 10 Rx Medical Equipment says Not Properly Docked?
To resolve the 'Not Properly Docked' error on your Mortara Medical Equipment, apply slight pressure to the top of the electrocardiograph ensuring a proper seat in the docking station.
What to do if Mortara ELI 10 Rx Medical Equipment says Battery Too Low for Operation?
To resolve the 'Battery Too Low for Operation' error on your Mortara Medical Equipment, return the electrocardiograph to the docking station and allow it to charge for a minimum of 4 hours.
How to fix No Printer Found error on Mortara ELI 10 Rx?
If your Mortara Medical Equipment displays 'No Printer Found', ensure the printer is powered on, and that interface A to B cable is properly attached.
Why does Mortara ELI 10 Rx say Unit Must Be Docked To Print?
To resolve the 'Unit Must Be Docked To Print' error on your Mortara Medical Equipment, ensure the electrocardiograph is properly docked in the docking station.
How to troubleshoot Printer Error on Mortara ELI 10 Rx?
To fix a 'Printer Error' on the Mortara Medical Equipment, ensure the printer has paper, the cable is connected, and the unit is powered on.
What does BUSY mean on Mortara ELI 10 Rx Medical Equipment?
If the Mortara Medical Equipment displays 'BUSY', re-transmit at a later time.
How to fix Printer Offline error on Mortara Medical Equipment?
If your Mortara Medical Equipment displays 'Printer Offline', ensure the printer is powered on.
How to fix NO DIALTONE error on Mortara Medical Equipment?
To resolve the 'NO DIALTONE' error on your Mortara Medical Equipment, ensure the telephone line is connected and has active service.
What causes NO CARRIER error on Mortara Medical Equipment?
If the Mortara Medical Equipment shows 'NO CARRIER', it means an inappropriate signal was received. Ensure the correct telephone number has been entered.
General| Brand | Mortara |
|---|---|
| Model | ELI 10 Rx |
| Category | Medical Equipment |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Key safety guidelines for proper device operation.
Ensures safe electrical connections and use of the device.
Precautions related to GSM/GPRS/WLAN modules and RF exposure.
Safe procedures for device cleaning and maintenance.
Steps for preparing the patient and skin for ECG acquisition.
Guidance on correct electrode positioning for V-leads and limb leads.
How to input patient information manually or via auto-fill.
Process for capturing, reviewing, and previewing ECGs.
Methods for printing and storing acquired ECG data.
Explains the focus of the system settings section.
Setting passwords and accessing configuration menus.
Overview of available system configuration parameters.
Managing software version, telephone number, and language.
Configuring volume, battery timeout, and flash size.
Setting ID format and auto-fill options for patient data.
Adjusting AC and plot frequency filters for signal quality.
Setting up LAN, WLAN, and GSM/GPRS network parameters.
Solutions for ECG data and transmission issues.
To Next Page
