How to fix NO USB MEMORY error on Mortara ELI 10 Rx Medical Equipment?
If the Mortara Medical Equipment displays 'NO USB MEMORY', install USB memory device to docking station and try again. If problem persists, contact Mortara Technical Service.
What to do if Mortara ELI 10 Rx says No Paper?
If your Mortara Medical Equipment displays 'No Paper' message, ensure the printer has paper.
What to do if Mortara ELI 10 Rx says Battery Too Low For Printing?
To resolve the 'Battery Too Low For Printing' error on your Mortara Medical Equipment, ensure the electrocardiograph is properly docked in the docking station and allow the battery to charge for 30 minutes.
What to do if Mortara Medical Equipment shows ECG Error?
If the Mortara Medical Equipment displays 'ECG Error' due to gross artifact, re-prep the patient and acquire a new ECG.
How to fix NO PHONE NUMBER error on Mortara Medical Equipment?
If the Mortara Medical Equipment displays 'NO PHONE NUMBER', enter the correct phone number into the configuration settings and attempt to transmit again.
What to do if Mortara Medical Equipment is unable to save ECG?
If the Mortara Medical Equipment displays 'Unable to save ECG', ensure the maximum capacity of either 60 or 150 ECGs has not been exceeded.
How to resolve Admin Password Compare Error on Mortara Medical Equipment?
If your Mortara Medical Equipment shows 'Admin Password Compare Error', ensure correct password entry in both locations.
How to resolve Tech Password Compare Error on Mortara ELI 10 Rx?
If your Mortara Medical Equipment shows 'Tech Password Compare Error', ensure correct password entry in both locations.
How to fix No Printer Found error on Mortara ELI 10 Rx?
If your Mortara Medical Equipment displays 'No Printer Found', ensure the printer is powered on, and that interface A to B cable is properly attached.
How to troubleshoot Printer Error on Mortara ELI 10 Rx?
To fix a 'Printer Error' on the Mortara Medical Equipment, ensure the printer has paper, the cable is connected, and the unit is powered on.
General| Brand | Mortara |
|---|---|
| Model | ELI 10 Rx |
| Category | Medical Equipment |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Key safety guidelines for proper device operation.
Ensures safe electrical connections and use of the device.
Precautions related to GSM/GPRS/WLAN modules and RF exposure.
Safe procedures for device cleaning and maintenance.
Steps for preparing the patient and skin for ECG acquisition.
Guidance on correct electrode positioning for V-leads and limb leads.
How to input patient information manually or via auto-fill.
Process for capturing, reviewing, and previewing ECGs.
Methods for printing and storing acquired ECG data.
Explains the focus of the system settings section.
Setting passwords and accessing configuration menus.
Overview of available system configuration parameters.
Managing software version, telephone number, and language.
Configuring volume, battery timeout, and flash size.
Setting ID format and auto-fill options for patient data.
Adjusting AC and plot frequency filters for signal quality.
Setting up LAN, WLAN, and GSM/GPRS network parameters.
Solutions for ECG data and transmission issues.
To Next Page
