To Next PageTo Next Page
Need help?Do you have a question about the Mortara ELI 210 and is the answer not in the manual?
General| Type | Electrocardiograph |
|---|---|
| Paper Type | Thermal |
| A/D Conversion | 20 bits |
| Pacemaker Detection | Yes |
| Compatibility | DICOM, HL7 |
| ECG Channels | 12-lead |
| Display | LCD |
| Paper Size | A4 |
| Connectivity | USB, LAN |
| Power Source | AC, Battery |
| Sampling Rate | 1000 samples/second/channel |
| Frequency Response | 0.05 to 150 Hz |
| Memory | Internal storage for ECG records |
Highlights safety precautions and guidelines for operating and maintaining the device.
Warns against operating the device in environments with flammable gases or anesthetics.
Stresses the importance of proper grounding for electrical safety when connecting equipment.
Guides users on how to navigate and access the device's system configuration settings.
Procedure for safely removing and replacing the unit's fuse for maintenance or troubleshooting.
Detailed steps for removing and reinstalling the main unit cover for internal access.
Instructions for safely removing and replacing the internal rechargeable battery.
Steps for removing and reinstalling the thermal writer assembly from the unit.
Detailed procedure for removing and installing the printhead assembly.
Procedure for removing and installing the main motherboard assembly.
Steps for removing and replacing the front-end board assembly.
Visual representation of the ELI 250/210 system architecture and component interconnections.
Technical specifications and performance parameters of the ELI 250/210 device.
Comprehensive list of all part numbers and their descriptions for the ELI 250/210 unit.
Diagnosing and resolving issues related to serial data communication.
Procedure to test the unit's power supply and battery charging functionality.
Performing tests to verify the functionality of the thermal writer and print quality.
Procedure to test ECG acquisition using a simulator and verify printout accuracy.
