To Next PageTo Next Page
Need help?Do you have a question about the Morton System Saver M20 and is the answer not in the manual?
General| Brand | Morton |
|---|---|
| Model | System Saver M20 |
| Category | Water Dispenser |
| Language | English |
Guidelines for selecting a suitable location for the water softener.
Requirements for complying with national, state, and local plumbing codes.
Specifies the necessary air gap for drain connections to prevent backflow.
Instructions for connecting the drain hose and requirements for rigid drain lines.
Details on using single or 3-valve bypass systems and suitable pipe materials.
How to set the current time on the softener's display.
Instructions for inputting the water hardness level for optimal performance.
Adjusting the automatic regeneration cycle start time.
Configuring the high-efficiency feature for salt usage.
Manually initiating an immediate regeneration cycle.
Scheduling an immediate recharge for the next cycle.
Adjusting backwash duration for improved cleaning.
Adjusting fast rinse duration for flushing.
How to set the current time on the softener's display.
Instructions for inputting the water hardness level for optimal performance.
Adjusting the automatic regeneration cycle start time.
Setting the salt level monitor to alert for refills.
Configuring the high-efficiency feature for salt usage.
Manually initiating an immediate regeneration cycle.
Scheduling an immediate recharge for the next cycle.
Adjusting backwash duration for improved cleaning.
Adjusting fast rinse duration for flushing.
How the controller retains settings during power interruptions.
Guidance on checking and refilling the salt storage tank.
Identifying and resolving salt bridging issues in the brine tank.
Procedure for cleaning critical internal components for proper function.
Steps to drain the unit to prevent damage from freezing temperatures.
Understanding error codes and the self-diagnostic system.
Using diagnostic mode to check valve operation and settings.
Restoring the controller to its original factory settings.
Step-by-step check of the regeneration process and component functions.
