To Next PageTo Next Page
Need help?Do you have a question about the Morton MSD45E and is the answer not in the manual?
General| Brand | Morton |
|---|---|
| Model | MSD45E |
| Category | Water Dispenser |
| Language | English |
Details the manufacturer's warranty coverage for parts and labor.
Outlines conditions, limitations, and legal rights applicable to the warranty.
Covers crucial steps and checks required before commencing installation.
Instructions for checking included components and safely handling the unit.
Advice on optimal location considering drains, water sources, and accessibility.
Lists essential tools, pipe fittings, and other necessary materials for installation.
Guidance on planning plumbing connections based on existing pipe types and sizes.
Steps for installing the bypass valve and plastic installation adaptors.
Connecting the overflow hose to the brine tank.
Moving the main softener unit into its installation position.
Connecting water supply pipes to the softener's inlet and outlet ports.
Instructions for installing a grounding wire for electrical continuity.
Connecting the drain hose and ensuring proper drain point setup.
Connect overflow hose, add water/salt, and connect power supply.
Flush pipes, test for leaks, and program the electronic control.
Overview of settings needed upon installation or after power loss.
Guide to setting the current time on the electronic control.
Instructions for inputting the water hardness level into the control.
Steps to sanitize the water softener using bleach after installation.
Explains different types of iron in water and their effects.
Guidance on maintaining the correct salt level in the storage tank.
How to identify and resolve salt bridging issues in the brine tank.
Procedures for cleaning iron deposits from the water softener's resin bed.
Steps for cleaning the nozzle and venturi assembly for proper function.
Addresses no soft water and intermittent hard water problems.
Explains the normal display during operation and regeneration cycles.
How to access and interpret various operational data displays.
Information on manually initiating regeneration cycles.
How to manually initiate or schedule a regeneration cycle.
How power interruptions affect settings and notes for extended absences.
Details on adjusting regeneration time, days, efficiency mode, and backwash.
How to set or check the correct model code for the unit.
Changing the time display format between 12-hour and 24-hour modes.
Adjusting the unit of measurement for water flow and usage displays.
Explains error codes and the self-diagnostic function of the control unit.
Steps for troubleshooting if no soft water is produced.
Procedure to enter diagnostics mode for checking system components.
How to manually advance through regeneration cycles to check operation.
