To Next PageTo Next Page
Need help?Do you have a question about the Morton System Saver MSD20F and is the answer not in the manual?
General| Brand | Morton |
|---|---|
| Model | System Saver MSD20F |
| Category | Water Dispenser |
| Language | English |
Details the 10-year tank and 1-year component warranty periods for the original owner.
Provides phone number and website for warranty questions, assistance, and part orders.
Lists warranty exclusions for misuse, improper installation, accidents, and environmental factors.
States that implied warranties of merchantability or fitness are disclaimed.
Explains that limitations may not apply in all states and outlines consumer rights.
Lists all required parts for assembling and installing the water softener unit.
Advises on protecting the unit if installed in an outdoor location from elements.
Presents detailed technical data tables for different Morton water softener models (MSD20F, MSD27B, MSD30D, MSD34C).
Shows the physical height and width measurements for each water softener model.
Explains how iron and sediment affect water quality and softener performance.
Notes a mandatory setting for the Salt Efficiency Feature in California installations.
Guides on choosing a suitable installation site, avoiding freezing temperatures and direct sunlight.
Emphasizes adherence to all national, state, and local plumbing codes for installation.
Details the necessary 1-1/2 inch gap for drain hose connections to prevent backflow.
Illustrates the correct sequence for installing water softener and other treatment devices.
Specifies how to connect the drain hose, including rigid drain options and maximum length.
Describes single bypass valve and 3-valve bypass system options, and acceptable pipe materials.
Provides a visual overview of the water softener's typical connection setup.
Essential safety step to shut off water and drain house pipes before installation.
Covers initial unit assembly, checking the brinewell, and installing the brine valve.
Guidance on positioning the water softener on a solid, level surface, avoiding shims under the tank.
Detailed instructions for connecting water supply lines to the softener valve, ensuring proper alignment.
Instructions for maintaining electrical grounding continuity, especially with plastic bypass valves.
Connecting the drain hose to the softener valve and ensuring a proper air gap.
Connecting the overflow hose from the salt tank to a suitable drain.
Procedure to check for leaks throughout the plumbing system after installation.
Adding water and Morton System Saver II Pellets to the salt storage tank.
Connecting the water softener to a power outlet using the provided transformer.
Initial setup and programming of the electronic controller based on model.
Process to disinfect the unit using household bleach during installation.
Instructions for restarting the water heater after softener installation and initial recharge.
Adjusting the current time on the softener's display for accurate operation.
Inputting the water's hardness level, including compensation for iron content.
Configuring the preferred time of day for automatic regeneration cycles.
Adjusting the salt efficiency feature for optimal salt usage and recharge frequency.
Manually initiating an immediate regeneration cycle to restore softened water capacity.
Scheduling an additional recharge for the next scheduled regeneration time.
Modifying the duration of the backwash cycle for better cleaning.
Modifying the duration of the fast rinse cycle.
Adjusting the current time on the softener's display for accurate operation.
Inputting the water's hardness level, including compensation for iron content.
Configuring the preferred time of day for automatic regeneration cycles.
Setting the salt level monitor to remind users to refill the salt storage tank.
Adjusting the salt efficiency feature for optimal salt usage and recharge frequency.
Manually initiating an immediate regeneration cycle to restore softened water capacity.
Scheduling an additional recharge for the next scheduled regeneration time.
Modifying the duration of the backwash cycle for better cleaning.
Modifying the duration of the fast rinse cycle.
Explains how the controller retains settings during electrical power interruptions.
Guidance on checking and refilling the salt storage tank to maintain water softening.
How to identify and resolve salt bridging issues in the brine tank.
Instructions for cleaning the nozzle and venturi assembly for proper brine suction.
Steps to drain the softener to prevent freeze damage in cold environments.
Explains the self-diagnostic function and how error codes are displayed.
Procedures to advance the softener through cycles for operational checks.
Explains the self-diagnostic function and how error codes are displayed.
Procedures to advance the softener through cycles for operational checks.
Guide to reset all controller settings to their original factory default values.
Verifies proper operation of valve motor, brine draw, and regeneration flow rates.
