4 Morton
®
System Saver
®
Installation & Operation Manual
Packing List
Inspect Shipment
Clips
(including 1 spare)
20 ft. Drain Hose
Bypass Valve
Adaptor Elbow
Installation
Adaptors
The parts required to assemble and install the unit are
included in a bag. Thoroughly check the water soften-
er for possible shipping damage and parts loss. Also
inspect and note any damage to the shipping carton.
FIG. 1
Hose Clamps
Remove and discard (or recycle) all packing materials.
To avoid loss of small parts, we suggest you keep the
small parts in the parts bag until you are ready to use
them.
Grommet
Weather Protection
If installing the unit in an outside location, be sure to
provide protection from the elements, contamination,
vandalism and direct sunlight.
Do not return the water softener to store.
If you have any questions, or there are missing parts or damage, please call Toll Free 1-888-64 WATER
(1-888-649-2837) Monday - Friday, 8 am - 7 pm EST.
When you call, please be prepared to provide the model and serial number of your product, found on the
rating decal, located on the rim below the salt lid hinges.
For more installation or service information, visit www.systemsaver.com.
To Next Page
Loading...
