EasyManua.ls Logo

Morton M45C - User Manual

Morton M45C
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
If you have any questions or concerns when
installing, operating or maintaining your
water softener, call our toll free number:
1-888-64 WATER
(1-888-649-2837)
or visit www.mortonwatersofteners.com
When you call, please be prepared to provide
the model and serial number of your product,
found on the rating decal, located on the rim
below the salt lid hinges.
Do not return water softener to store
7381229 (Rev. C 4/6/20)
Systems tested and certified by NSF International
against NSF/ANSI Standard 44
for hardness reduction and efficiency,
and certified to NSF/ANSI Standard 372.
How to install, operate
and maintain your Demand
Controlled Water Softener
with Wi-Fi
Water Softener
Installation and Operation Manual
Model M45C
For best results use Morton
®
Clean
and Protect
®
or Morton
®
Clean
and Protect
®
Plus Rust Defense
®
Pellets in your water softener.
Manufactured and warranted by
Water Channel Partners
1890 Woodlane Drive
Woodbury, MN 55125

Questions and Answers

  • B
    Bryan MyersJul 30, 2025
    What to do if my Morton Water Dispenser displays Error Codes 07, 08 & 09?
    • J
      Joshua GallagherJul 30, 2025
      If your Morton Water Dispenser shows Error Codes 07, 08, or 09, ensure the water shutoff valve is plugged into the water softener’s control board. Press and hold the RECHARGE button for 3 seconds. If the error code reappears after a minute or two, the water shutoff valve may need replacement, as the water shutoff valve probably needs to be replaced.

Morton M45C Specifications

General IconGeneral
TypeCountertop
ColorWhite
MaterialPlastic
Water TemperatureHot and Cold
Dispensing OptionsPush-button

Related product manuals