17"
21"
48"
41-1/2"
IN - OUT
34"
3-3/4"
INOUT
FRONT VIEW SIDE VIEW
4 Morton
®
Water Softener Installation & Operation Manual
Packing List
Inspect Shipment
The parts required to assemble and install the unit are
included in a bag. Thoroughly check the water soften-
e
r for possible shipping damage and parts loss. Also
inspect and note any damage to the shipping carton.
FIG. 1
Remove and discard (or recycle) all packing materials.
To avoid loss of small parts, we suggest you keep the
s
mall parts in the parts bag until you are ready to use
them.
Do not return the water softener to store.
If you have any questions, or there are missing parts or damage, please call Toll Free 1-888-64 WATER
(1-888-649-2837).
When you call, please be prepared to provide the model and serial number of your product, found on the
rating decal, located on the rim below the salt lid hinges.
For more installation or service information, visit www.mortonwatersofteners.com.
Dimensions
FIG. 2
OUT
IN
FRONT VIEW
SIDE VIEW
IN - OUT
41-1/2”
48”
34”
21”
Drain HoseBypass Valve
Adaptor Elbow
Installation
Adaptors
Hose Clamps
O-rings
Grommet
Cover Lock
(for shipping only)
Rim Insert
(for shipping only)
Clips
17”
3-3/4”
To Next Page
Loading...
