Morton System Saver MSD20F - Page 2

2 Morton
®
System Saver
®
Installation & Operation Manual
For best results use Morton
®
System Saver
®
II Pellets
to soften your water
Morton
®
System Saver
®
II Pellets make a big difference in your water.
Morton
®
System Saver
®
II Pellets are specially formulated to consistently outperform other water soft-
ening salts in all water softeners. System Saver
®
II Pellets enable your water softener to remove
almost twice as much dirt and impurities and up to 5% more minerals from your water than plain salt
pellets. And that can mean a big difference in the quality of your water.
Morton
®
System Saver
®
II Pellets make a difference in your water softener, too.
Hard water contains traces of dirt, iron and other minerals that can build up in the resin and valves of
your water softener. That can lead to expensive repairs. But Morton
®
System Saver
®
II Pellets are
specially formulated to clean out those traces of dirt and minerals and to help keep your softener clean
and problem-free longer than all other salt pellets. System Saver
®
II Pellets are formulated with salt
that is guaranteed 99.5% pure and contains virtually no insolubles that need to be cleaned from your
brine tank.
With Morton, Your Soft Water Solution is in the Bag.
Morton
®
System Saver
®
II Pellets come in a handy yellow 40 lb. bag that’s easy to lift, carry, open and
pour. The easy-open pull-tab opens just wide enough to allow salt to pour out easily, yet enables you
to regulate the flow. And the sturdy handle makes it easy for you to carry.