EasyManuals Logo

Motak MR10-RGB24-C-S User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
For Warranty Service Call: 833-474-0367 Range Owner’s Manual 20201109
Checking For Gas Leaks: Use of a gas leak detector or a soapy water solution is recommended for
locating gas leaks. Matches, candle flame, or other sources of ignition shall not be used for this
purpose. Check entire piping system for leaks.
Notable Cautions:
Installation, operation and maintenance of this device should be done by professional
personnel or qualified people.
Please keep the integrity of the appliance and remove the outer packing. If you have any
questions, call the manufacturer and stop using the appliance. Keep the packing materials
away from children. (Plastic bags, nails etc.)
Upon first use, the duration of ignition may be a little longer due to the air existing in the new
pipe. If the ignition cannot be lit up, turn off the gas valve and wait 3 minutes to allow unused
gas to dissipate.
Do not use a gas type or gas regulator that is not applicable for this range. Make sure the gas
supply is the same as the gas type this device is set up to use. If not, please stop using
immediately.
During operation, do not leave unattended.
This product is a commercial machine that needs to be operated by trained professional
personnel.
This device is for commercial use only, not applicable for other usage.
Do not sway or tilt during operation.
Do not dismantle or self-modify the device. Dismantlement or modification may cause damage
to the appliance and WILL VOID THE WARRANTY.
Use only as intended. Abnormal operation may cause damage and danger.
Do not obstruct the exhaust vent, which will cause damage to the appliance and do harm to
your health.
High surface temperature may cause burns. Do not touch the appliance with hands directly
during or after operation. To avoid burns, do not move the device if it is still hot.
Do not spray water directly on the device. Clean the stainless steel surface regularly to prevent
damage caused by surface oxidation and chemical reaction. Always clean with the grain.
Do not deface the control panel with hard or sharp objects.
If the device is malfunctioning, turn off the gas main valve upstream to the device and contact
the manufacturer to repair. For warranty service call 833-474-0367
Do not put any flammable objects (e.g. towel etc.) anywhere of the surface, or it may cause
fire.
After using, please turn off the gas valve immediately.
If any gas leakage is found, please turn off the gas valve and open the window to ventilate. Do
not turn the power and switches on or off.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motak MR10-RGB24-C-S and is the answer not in the manual?

Motak MR10-RGB24-C-S Specifications

General IconGeneral
BrandMotak
ModelMR10-RGB24-C-S
CategoryRanges
LanguageEnglish

Related product manuals