31 MoTeC Configuration
Top Displays
The three numeric displays shown above can be programmed to display any
channel value.
The numeric displays can show any channel value plus up to two override
values. Override values display each time their value is updated. This is
useful for values that are updated periodically. The override values are shown
for a programmable period of time. For example, a numeric display could
normally show the Running Lap Time (which is continuously updating), then
be overwritten by the Lap Time for 10 seconds each time the Lap Time is
updated.
The label above each of the numeric displays can be changed to suit the
channel assigned.
To Next Page
Loading...