MoTeC Appendices 41
Internal Sensors
• 3 axis G sensor
• Dash temperature sensor
• Sensor supply voltage
• Battery voltage
Communications
• 4 configurable CAN buses, with individually programmable CAN bus
speeds. One can be used as RS232 Receive. Only 2 of the CAN buses
support VIM/SVIM Expanders
o Maximum data range 1 Mbit/sec
o Recommended terminating impedance 100 ohm
• 2 dedicated RS232 ports
Physical
• Size: 134.5 x 103.9 x 20.2 mm excluding connector
• Weight 410 g
• 1 x 79 pin Autosport connector
Power Supply
• Operating voltage: 6 to 32 volt DC
• Operating current: 0.5 ampere typical (excluding sensor currents)
• Reverse Battery protection
• Battery Transient protection
Operating Temperature
• Internal Temperature Range: –20 to 70 °C (above 60 °C maximum
backlight brightness progressively reduced)
• Ambient Temperature Range: –20 to 55 °C
Sensor Supply Current
• 5 V Sensor supply: 0.25 ampere maximum
• 8 V Sensor supply: 0.25 ampere maximum
To Next Page
Loading...