2 Introduction
• Telemetry (T2) and remote logging options
Display
• Colour TFT LCD, anti-reflective
• 12 customisable layout options
• Customisable measurement units and warnings
• Configurable dial, sweep or bar graph can display any channel with
optional peak, hold and shift markers
• 48 user-defined alarms, e.g. Low Oil Pressure, Low Fuel, Fast Lap
• Programmable overrides - particularly useful for showing values such as
lap times
• Three programmable modes or 'pages' with customisable labels ensure
the driver is shown only the most relevant information at any given time
• Adjustable backlight
Software
• Windows-based software designed for setup and management of the
display and data logging system
• The user can generate a configuration file offline and then send the
completed configuration to the C185
• Calculations including lap times, lap gain/loss, speed and distance, fuel
prediction
• Monitor active channels—view all channels live
• Sensor zeroing
• Details editor including event, venue and vehicle details
• Extensive Help screens
• Latest software version is available free of charge from
www.motec.com/downloads
To Next Page