EasyManua.ls Logo

Motec Systems C185 - Page 75

Motec Systems C185
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70 Appendices
Fast Direct Connection (Fixed IP Address)
If the Basic Direct Connection method takes too long to connect, a more
advanced setup can be used to reduce connection times to around 3
seconds.
Notes:
Please be aware that changing the PC's network settings can make
connections to other devices on the network stop working.
Only change the PC network settings if the PC does not need to be
connected to a network or to a device such as a cable or ADSL modem via
the same Ethernet port.
If the PC has a second Ethernet port that is not used to connect to a
network then this can be used without affecting the network.
On some PCs an unused Ethernet port may be available if the PC always
connects to the network via a wireless connection.