7
point key.
(15) Beep (3) : Beeper control key which toggle the beeper on or off.
Numeric entry key for number three.
(16) Enter : Enter the values on the display for the specified function and return the
display to output-off mode or metering mode.
(17) Clear : Used in conjunction with the numeric entry keys to clear partially set
commands.
Also returns unit to the previous mode.
(18) output(on/off) : mode control key which toggles the output on or off simultaneously.
(19) output terminal (RED) : This terminal is used to output +30V/+2.5A with respect to the
COM1 terminal.
(20) COM1 Terminal(BLACK) : The common terminal which is used for +30V/+2.5A output.
(21) – output Terminal(WHITE) : This terminal is used to output +30V/+2.5A with respect to the
COM1 terminal.
(22) GDN Terminal (GREEN) : This ground(earth) terminal is connected to the main chassis.
(23) COM2 Terminal(BLUE) : The common terminal which is used for 5V/3A or 3.3V/3A output.
(24) 5V/3.3V Terminal )RED) : This terminal is used to output 5V/3A or 3.3V/3A with respect to the
COM2 terminal.
To Next Page
Loading...
