To Next Page
D
David HolmesSep 23, 2025
How to enable hibernation on Motion Computing Tablet?
- XxdavisSep 23, 2025
If the Motion Computing Tablet PC won’t enter Hibernation mode, enable Hibernation through Power Option Properties. Hibernation may not be enabled.
How to enable hibernation on Motion Computing Tablet?
If the Motion Computing Tablet PC won’t enter Hibernation mode, enable Hibernation through Power Option Properties. Hibernation may not be enabled.
Why does my Motion Computing Tablet screen go black?
If the display on your Motion Computing Tablet goes black while the Tablet PC is still turned on, and the power LED flashes green, the system may have gone into Stand By. Slide the Power switch for about a second to resume operations. If the power LED is off, the system may have gone into low-battery Hibernation. Slide the Power switch for about a second to resume operations and connect the AC adapter to the Tablet PC to charge the battery.
What to do if Motion Computing Tablet won’t shut down?
If your Motion Computing Tablet PC won’t shut down, it may be due to an application that has locked up the Tablet PC. Press the Security button to start Windows Task Manager and close the application. Alternatively, slide and hold the Power switch for at least 5 seconds to force a shutdown of the Tablet PC.
Why is my Motion Computing Tablet running so slow?
If the system seems to be operating more slowly than usual, it may be that the hard disk drive is full or nearly full. Run the Disk Cleanup utility to clear out unnecessary and temporary files, and remove unneeded programs and files. It may also be that the disk needs defragmenting, so run Disk Defragmenter to consolidate files and folders on the hard drive.
How to fix no sound on Motion Computing Tablet?
If no sound is coming from any speakers on your Motion Computing Tablet, the audio volume may be too low or has been muted. Open the Motion Dashboard and adjust the speaker volume by sliding the volume slider or uncheck the Mute button.
How to enable right click on Motion Computing Tablet pen?
If the Pen button doesn’t work on your Motion Computing Tablet and you can’t get it to right-click, re-activate the right-click option: Double-click the Tablet and Pen Settings icon, select Pen Options, and reselect Use pen button to right-click. Select Apply>OK. Also, to right-click, hold the Pen button down and then firmly tap on the display. You may not be correctly timing clicking the Pen button and tapping the Pen on the display.
How to adjust brightness on Motion Computing Tablet?
If the display looks dim on your Motion Computing Tablet, adjust brightness from the Motion Dashboard. The brightness may be set too low.
Why doesn't my Motion Computing Tablet recognize PC card?
If the system doesn’t recognize the PC card you’ve inserted into your Motion Computing Tablet, eject the card and re-insert it with the label side up. The card may be incorrectly inserted. Also, check Windows XP compatibility, as the device may not be supported.
How to fix unreadable screen on Motion Computing Tablet?
If the screen is unreadable or distorted on your Motion Computing Tablet, reset resolution to 1024 x 768 and color quality to 32-bit by opening the Motion Dashboard, Graphics Properties, then the Schemes tab. The screen resolution and/or color quality may be set incorrectly.
Why is my Motion Computing Tablet Ethernet not working?
If data doesn’t transfer through the wired Ethernet cable on your Motion Computing Tablet, reconnect and check the activity LEDs next to the LAN (RJ-45) port. They should flash green and amber. The Ethernet cable may not be connected correctly.
General| Brand | Motion Computing |
|---|---|
| Model | M1400 |
| Category | Tablet |
| Language | English |
