Why doesn't Motion Computing Tablet recognize FlexDock accessories?
If the Motion Computing Tablet PC is sitting in the Motion FlexDock, but the system doesn’t recognize any accessory devices, such as the external monitor or CDROM, reseat the Tablet PC in the Motion FlexDock. The Tablet PC may not be fully seated in the Motion FlexDock.
How to disable wireless on Motion Computing Tablet?
If the wireless communication keeps connecting even when you don’t want it to on your Motion Computing Tablet, uncheck the wireless checkboxes in the Motion Dashboard. The default setting may be On.
How to fix Motion Computing Tablet display after disconnecting monitor?
If when you disconnected a second monitor from the Motion Computing Tablet PC, the image became too big for the Tablet PC display, tap the Properties button on the Motion Dashboard. Tap Graphics Options, then Graphics Properties... to open the Properties screen and select Notebook to make the Tablet PC the primary display. The Tablet PC may have attempted to spread the image of a window or desktop beyond the screen area of the active monitor.
How to fix Motion Computing Tablet that won't start?
If your Motion Computing Tablet PC won't start when you slide the power switch, ensure the power switch is fully engaged by sliding and holding it for at least a half-second, but no more than three seconds. Also, if the battery is fully discharged or there is no battery and no AC power, connect the AC adapter to operate the Tablet PC and charge the battery.
Why is there no sound from Motion Computing Tablet speakers?
If no sound is coming from the built-in speakers on your Motion Computing Tablet, disconnect the headset or external speakers if not in use. Connecting a headset or external speakers mutes the built-in speakers.
How to fix unreadable screen on Motion Computing Tablet?
If the screen is unreadable or distorted on your Motion Computing Tablet, reset resolution to 1024 x 768 and color quality to 32-bit by opening the Motion Dashboard, Graphics Properties, then the Schemes tab. The screen resolution and/or color quality may be set incorrectly.
How to adjust screen resolution on Motion Computing Tablet?
If the desktop is too big for the display on your Motion Computing Tablet and you can’t see all of the desktop icons, decrease the screen resolution by opening the Motion Dashboard, selecting Graphics Properties, then the Schemes tab. The screen resolution may be set higher than the default 1024 x 768 with 32-bit resolution.
Why is my Motion Computing Tablet Ethernet not working?
If data doesn’t transfer through the wired Ethernet cable on your Motion Computing Tablet, reconnect and check the activity LEDs next to the LAN (RJ-45) port. They should flash green and amber. The Ethernet cable may not be connected correctly.
Why does my Motion Computing Tablet keep showing the wrong time?
If the system keeps showing the wrong date and time even after you reset it on your Motion Computing Tablet, check that the time zone is correct and reset it as needed. The wrong time zone may be selected.
How to close unresponsive program on Motion Computing Tablet?
If the program you’re working in has stopped responding, but the cursor moves and other programs work, the program has crashed. Press the Security button (small button with a key icon) on the Tablet PC front panel to open the Task Manager and end the non-responsive program.
General| Brand | Motion Computing |
|---|---|
| Model | M1400 |
| Category | Tablet |
| Language | English |
To Next Page
