4 AP-0622 Access Point
1 Introduction
The AP-0622 access point, a component of the Motorola Solutions wireless controller system, links wireless
802.11a/b/g/n devices to the controller, enabling the growth of your wireless network with a cost effective
alternative to standard access points. The AP-0622 access point provides multiple deployment options.
The AP-0622 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable.
An 802.3af Ethernet switch or power supply (specifically rated for the AP-0622) is required (Part No.
PWRS-14000-148R).
This guide applies to Model Number AP-0622.
This document is written for the qualified network device installer.
1.1 Document Conventions
The following graphical alerts are used in this document to indicate notable situations:
NOTE Tips, hints, or special requirements that you should take note of.
CAUTION Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
WARNING! Indicates a condition or procedure that could result in personal injury or
equipment damage.
To Next Page
Loading...
Need help?
General
