NEXT > < PREV CONTENTS
ADVANCED FEATURES
This feature allows you to monitor traffic on different
channels by scanning a preprogrammed list of
channels. Scanning is halted if you initiate a call and
resumes when the call has ended.
Procedure:
[Menu]
1. From the home screen, scroll left or right to
Scan.
2. Press the Menu Select button directly below
Scan.
If the scan is enabled, the display shows Scan
On and the scan status icon.
OR
If the scan is disabled, the display shows Scan
Off.
The radio returns to the home screen.
Scan
Turning Scan On or Off
66
To Next Page
Loading...
