2 Tap CommandCentral Login, then enter your username or email address followed by your
password.
3 Tap Sign On.
4 Scroll down and tap the Received passcodes via email button.
5 Enter the passcode and tap Verify to complete the log in.
5.1.4.2
Logging In to CommandCentral (Subsequent Login)
Procedure:
1 From the Home screen, tap Shift Manager Launcher.
2 Tap CommandCentral Login, then enter your username or email address followed by your
password.
3 Tap Sign On, then enter the verification code generated by your device (if 2-factor
authentication is enabled).
NOTICE:
You can request to resend the code to the connected device.
The code is 8 characters and can be alphanumeric.
4 Tap to complete the log in.
5.2
Status Indicators
This section explains the status indicators of the radio.
5.2.1
Battery Charge Status
If you press the PTT button when your battery is low, the LED blinks red and you hear a short, high-
pitched tone.
5.2.2
Radio Icons
These icons appear at the status bar to provide device-specific information or status.
Icon Name Description
(Front display)
(Top display)
Battery Indicates the remaining battery level of the ra-
dio. The icon blinks when the battery level
drops to 10% or lower.
Bluetooth On Steady – Bluetooth is on and ready for Blue-
tooth connection.
Inverted – Bluetooth is connected to an external
Bluetooth device.
MN005642A01-AG
Chapter 5: Home Screen
25
To Next Page
Loading...
Need help?
General
