3.1
Assignable Radio Functions
Your system administrator can program the programmable buttons or switches as shortcuts to radio
functions depending on the duration of a button press. Contact your system administrator to learn more
about the radio functions assigned to the programmable buttons and switches of your radio.
Table 4: Assignable Radio Functions
Function Description
Audio Playback Short press – plays the last saved call audio followed by oth-
er saved audio in the sequence from oldest to newest.
Long press – saves the received call audio into your radio.
NOTICE: These programmable buttons do not
function if the radio is in the Recents menu.
Bluetooth On/Off Toggles Bluetooth between on and off.
Bluetooth Configuration Allows you to access the Bluetooth menu.
Bluetooth Audio Reroute Allows you to toggle the audio route between the radio
speaker or the Remote Speaker Microphone and the Blue-
tooth headset.
Bluetooth Headset PTT Keys up the Bluetooth Headset microphone.
Call Alert Allows the radio to function like a pager, or helps you verify if
a radio is active on the system.
Call Response Allows you to answer a private call.
Channel Up/Down Allows you to scroll up or down to other channels within the
current Zone.
Chanel Select Allows you to select a channel from the switch.
Channel Search Allows you to search for a channel.
Dynamic Priority (Conventional
Only)
Allows any channel in a Scan List (except for a Priority-One
channel) to temporarily replace the Priority-Two channel.
Emergency Depending on the programming, initiates or cancels an
emergency alarm or call.
Internet Protocol Address Displays the Internet Protocol (IP) address, device name,
and status of the radio.
Light/Flip Short press – toggles the display backlight on and off.
Long press – flips the screen orientation of the top display.
Location Displays the current location (latitude, longitude, time, and
date), and also the distance and bearing to another location,
or toggles GPS/Location between on and off.Toggles the
GPS/Location capabilities on and off.
Monitor (Conventional Only) Monitors a selected channel for all radio traffic until the func-
tion is disabled.
Nuisance Delete Temporarily removes from the scan list an unwanted chan-
nel, except for priority channels and the designated transmit
channel.
MN005642A01-AG
Chapter 3: Radio Overview
8
To Next Page
Loading...
Need help?
General
