What to do if Motorola Solutions Radio fails the vacuum leak test?
If your Motorola Solutions Radio fails the vacuum leak test, locate the area that's leaking and either fix it or replace the faulty component.
What to do if Motorola solutions MTP3100 Radio back chassis subassembly fails vacuum leak test?
If the back chassis subassembly fails the vacuum leak test, discard it.
What to do if Motorola Solutions Radio bottom connector subassembly fails vacuum leak test?
If the bottom connector subassembly fails the vacuum leak test, discard it.
What to do if Motorola Solutions Radio front housing kit fails vacuum leak test?
If the front housing kit fails the vacuum leak test, discard it.
General| Frequency Bands | 380-430 MHz |
|---|---|
| Battery Life | Up to 28 hours (standard battery) |
| Weight | Approx. 350 g (with standard battery) |
| Dimensions | 137 x 55.5 x 37.5 mm (without antenna) |
| Ingress Protection | IP54 |
| Operating Temperature | -30°C to +60°C |
| Digital Protocol | TETRA |
| Frequency Range | 380-430 MHz |
| IP Rating | IP54 |
| Channel Spacing | 12.5 kHz |
| Display | Monochrome LCD |
Details intellectual property rights, trademarks, and licensing information.
Covers open source, WEEE directive, and general disclaimers.
Log of major changes implemented in the manual across different editions.
Information necessary for testing and maintaining the radio, including assembly/disassembly.
Explains the meaning and purpose of warning, caution, and note notations used for safety.
Discusses RF energy exposure, compliance with standards, and safety guides.
Provides awareness, control information, and operational instructions for occupational RF exposure.
Information regarding radios approved for intrinsic safety and their specific labeling requirements.
Addresses potential electromagnetic interference and compatibility issues with electronic devices.
Safety guidelines for using the radio while driving, general warnings, and cautions.
Details warranty conditions, return instructions, and support options after warranty expiration.
Lists part numbers and titles of related publications for the EMEA region.
Provides general, receiver, and transmitter specifications for the radio models.
Explains the numbering scheme used for sales models and their corresponding descriptions.
Explains digital modulation, TDMA, and voice compression technologies used in the radio.
Details the sections of the Digital/RF board, including Digital, Transmitter, Receiver, and Frequency Generating.
Discusses the components and functionality of GPS, Bluetooth, and GNSS systems in the radio.
Directs users to the TETRA Customer Programming Software (CPS) Plus Startup User Guide for radio programming.
Details typical and alternative test setups, including assembly and disassembly procedures.
Summarizes required test setups and guides for configuring test equipment like IFR 3901/3902/3920 and IFR 2968.
Outlines procedures for RF tests, call processing, duplex tests, manual mode, and charger recognition.
Illustrates expected results and actions for radio testing and maintenance procedures.
Guidelines for regular inspection, cleaning, and safe handling of sensitive components and devices.
Details general repair techniques, torque specifications, and parts replacement guidelines.
Lists replacement parts, accessories, and exploded views for radio maintenance.
Step-by-step instructions for disassembling and reassembling the radio for repair or maintenance.
Procedure to ensure radio IPx8 compliance using a vacuum leak tester.
Procedure for IPx7 compliance testing using a hand pump vacuum leak tester.
Steps to identify and service leak areas if the radio fails vacuum leak tests.
Outlines service structure, maintenance levels, and general support contact information.
Provides contact details for service centers in Latin America and the Caribbean region.
Lists essential programming equipment and service replacement kit matrix.
Explains how to select bottom connector modes using logic levels for various accessories.
Details SLIM connector pin assignments and operation modes for audio UC.
Lists test equipment and their part numbers required for servicing the radio.
To Next Page
