Motorola solutions MTP3100 - Figure 35: Keypad Installation FKP Keypad

2. Place the keypad bezel and main keypad combination on the front housing. Using the Torx driver
with the 6IP Torx-Plus bit, screw in the four screws on the front housing with a torque of 2.5±0.1 in-lb
(0.28±0.011 Nm).
Figure 35: Keypad Installation FKP Keypad
1
2
3
5
4
No. Description
1 FKP keypad flex assembly
2 Mylar dome
3 Main keypad (FKP)
4 Keypad bezel (FKP)
5 Membrane, Bottom Mic
68015000841-EL
Chapter 5: Maintenance
108