Motorola solutions MTP3100 - Alternative Test Setup; Figure 2: Typical Test Setup

Figure 2: Typical Test Setup
2
1
3
4
5
Label Description
1 IFR 39xx/IFR 2968
2 N-Type RF Connector
3 RF Cable (PMLN5891_)
4 Battery Eliminator (PMLN6101_)
5 3.8 V Power Supply
4.2
Alternative Test Setup
Cable adapter PMLN5891_ enables connecting to the RF adapter connector on the main board. Thus, it
allows RF testing of the main board in a radio, which has its back cover disassembled. On one side, the cable
adapter has a mating RF adapter connector with mechanical grasping mechanism to the antenna port; on the
other side, the connection is SMA male.
68015000841-EL
Chapter 4: Test Setup and Testing
40