Motorola solutions MTP3100 - Removing the Keypad; Figure 32: Speaker Assembly Removal

Figure 32: Speaker Assembly Removal
1
2
3
No. Description
1 Speaker Retainer screw
2 Speaker Retainer
3 Speaker Assembly
5.10.1.12
Removing the Keypad
Prerequisites: Recommended tools:
● 6IP Torx-Plus Bit
● Torx Driver
Procedure:
1. Using the Torx driver with the 6IP Torx-Plus bit, unscrew the four screws fastening the main keypad
bezel to the front housing with a torque of 2.5±0.1 in-lb (0.28±0.011 Nm).
2. Remove the keypad bezel and main keypad from the front housing.
68015000841-EL
Chapter 5: Maintenance
105