2 Lay the radio down in a horizontal position.
The radio plays an alert tone and the display shows Man Down Detected.
Postrequisites: If Man Down is configured but the condition does not trigger the activation of the
feature, send the radio to a qualified technician.
13.3
Exiting Man Down
Procedure:
To exit Man Down mode, press Cancel.
13.4
Re-Initiating Man Down
Procedure:
To re-initiate Man Down after exiting Emergency Operation, perform one of the following actions:
• Return the radio to a vertical position.
• If motion sensitivity is enabled, shake the radio.
MN005642A01-AG
Chapter 13: Man Down
47
To Next Page
Loading...
