18
ENGLISH
If a status indicator light does not look correct, look for these possible problems:
If LED is
not Lit
Possible problems
Power
• Make sure the power switch is in the ON position.
• Make sure the power adapter is plugged into the DSL Gateway properly.
• Try a known good wall outlet.
• Replace the power supply and/or unit.
DSL
• Make sure that any telephone has a microfilter installed.
• Make sure that you are using the correct cable. The DSL cable is the thin-
ner standard telephone cable.
• Make sure the DSL cable is plugged into the correct wall jack.
• Make sure the DSL cable is plugged into the DSL port on the DSL Gate-
way.
• Make sure the DSL line has been activated at the central office DSLAM.
• Make sure the DSL Gateway is not plugged into a micro filter.
To Next Page
Loading...
Need help?
General