Motorola 900 series - Page 85

Removing and Installing Device Modules
9 Install the SCSI Device Module's AC jumper cable, SCSI Interconnect cable,
environmental control cable,
and SCSI terminator (if applicable). Do this for
each SCSI Device
Module in the stack
Install all AC jumper cables on the stack Attach any other cables removed.
10 To replace the crown, align the tabs on the rear of the crown with the
rectangular slots on the module and press downward.
10456.00 9307
S900RF/D4
A-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com