Basic Configuration
35
3. Select the WEP 128 (104 bit key) checkbox.The WEP 128 Setting field displays within the
New Security Policy screen.
4. Configure the WEP 128 Setting field as required to define the Pass Key used to generate
the WEP keys
.
5. Click the Apply button to save the security policy and return to the AP-71XX Quick Setup
screen.
Pass Key Specify a 4 to 32 character pass key and click the Generate button.
The access point, other proprietary routers and Motorola MUs use
the same algorithm to convert an ASCII string to the same
hexadecimal number. Non-Motorola clients and devices need to
enter WEP keys manually as hexadecimal numbers. The access
point and its target client(s) must use the same pass key to
interoperate.
Keys #1-4 Use the Key #1-4 fields to specify key numbers. For WEP 64
(40-bit key), the keys are 10 hexadecimal characters in length. For
WEP 128 (104-bit key), the keys are 26 hexadecimal characters in
length. Select one of these keys for activation by clicking its radio
button. The access point and its target client(s) must use the same
key to interoperate.