Hardware Installation
19
2.5 LED Indicators
Five LEDs illuminate on the front of the AP-7131 (on top of the AP-7131 housing) for dual radios
models and four illuminate for single radio models. One LED (for above the ceiling installations) is
located on the back of the device.
The LEDs on the top housing of the AP-7131 are clearly visible in wall and below ceiling installations.
The top housing LEDs have the following display and functionality:
NOTE The LED blink rate is proportional to activity. The busiest traffic
corresponds to the fastest blink, while the slowest traffic corresponds to
slowest blink.
NOTE Depending on how the 5 GHz and 2.4 GHz radios are configured, the LEDs
will blink at different intervals between amber and yellow (5 GHz radio)
and emerald and yellow (2.4 GHz radio).
To Next Page
Loading...
