Motorola AP-7131 - Resetting the AP-7131 Password

Basic AP-7131 Configuration
23
3. Change the password.
Enter the current password and a new admin password in fields provided, and click Apply.
Once the admin password has been updated, a warning message displays stating the
AP-7131 could be operating illegally unless set to operate in the correct country. Proceed to
“
Configuring “Basic” Device Settings” on page 24 to validate the country setting.
3.1 Resetting the Password
The access point has a means of restoring its password to its default value. Doing so also reverts the
access point’s security, radio and power management configuration to their default settings. Only an
installation professional should reset the access point’s password and promptly define a new
restrictive password.
To contact Motorola Support in the event of a password reset requirement, go to
http://www.symbol.com/contactsupport
.
NOTE Though the AP-7131 can have its basic settings defined using a number of
different screens, Motorola recommends using the AP-7131 Quick
Setup screen to define a minimum required configuration from one
location.
CAUTION Only a qualified installation professional should set or restore the
access point’s radio and power management configuration in the
event of a password reset.
!