location data. E.g. Mode
Change, Lightbar, Siren, Direct
Status and Location Data.
Call Alert Allows the radio to function like
a pager, or to verify if a radio is
active on the system.
Call Response Allows you to answer a private
call.
Channel Selects a channel.
Contacts Selects the Contacts menu.
Dynamic Priority
(Conventional
Only)
Allows any channel in a Scan
List (except for the Priority-One
channel) to temporarily replace
the Priority-Two channel.
Emergency Depending on the
programming, initiates or
cancels an emergency alarm or
call.
Information Displays the information of the
radio.
Internet Protocol
Address
Display the Internet Protocol
(IP) address, device name and
status of the radio.
Location Determines the current location
(latitude, longtitude, time and
date), and also the distance
and bearing to another location.
Or, turns the GPS functionality
on or off for all location.
Message Enters the current message list.
Mode Select Long-press programs a button
with the current zone and
channel of the radio; once
programmed, the short-press of
that button changes the radio
zone channel to the
programmed zone and channel.
Monitor
(Conventional
Only)
Monitors a selected channel for
all radio traffic until function is
disabled.
Multiple Private
Line
(Conventional
Only)
Selects the Multiple Private
Line lists.
Identifying Radio Controls
27
English
To Next Page
Loading...
