Motorola APX 1000 Series - Emergency Operation; Sending an Emergency Alarm

If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen of
Contacts.
Emergency Operation
The Emergency feature is used to indicate a critical
situation.
If the Top (Orange) button is preprogrammed to send
an emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
Check with your dealer or system administrator for
more information on the programming of this feature.
Only one of the Emergency modes above can be
assigned to the preprogrammed Emergency button.
Note: To exit emergency at any time, press and hold
the preprogrammed Emergency button for about a
second.
The radio operates in the normal dispatch manner
while in Emergency Call, except if enabled, it returns
to one of the following:
Tactical/Non-
Revert
The radio sends emergency
alarm and/or make emergency
call on the current selected
channel.
Non-Tactical/
Revert for
Conventional
system
The radio reverts to the
preprogrammed emergency
channel to send alarm and/or
make emergency call.
Non-Tactical/
Revert for
Trunking system
The radio reverts to the
preprogrammed emergency
talkgroup to send alarm and/or
make emergency call.
Sending an Emergency Alarm
This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.
Advanced Features
68
English