Motorola APX 1000i 2 - Chapter 4: Status Indicators; Battery Charge Status; Fuel Gauge Icons; Accessing the Battery Info Screen

Chapter 4
Status Indicators
This section explains the status indicators of the radio.
4.1
Battery Charge Status
Your radio indicates the battery charge status through LED, sounds, and the fuel gauge icon on the
display. You can also check the battery charge status by using the menu entry.
If you press the PTT button when your battery is low, the LED blinks red and you hear a short, high-
pitched tone.
4.1.1
Fuel Gauge Icons
The fuel gauge icon indicates the battery level of your radio.
Gauge Battery Charge
76% to 100% full
1
51% to 75%
1
26% to 50%
1
11% to 25%
1
10% or less (at 10%, the gauge begins blinking)
4.1.2
Accessing the Battery Info screen
This feature displays the current capacity and charges cycles of your battery when an IMPRES battery
is powering your radio. This feature must be enabled in your radio to see the information.
Procedure:
1 or to Batt.
2 Press the Menu Select button directly below Batt.
Your radio displays the following result:
Charge Percentage
Percentage of current battery capacity.
1
For IMPRES battery operation only.
MN004863A01-AG
Chapter 4: Status Indicators
24