• or to Compose and press the Menu Select button directly below Sel .
• Press the Menu Select button directly below Exit to return to the Home screen.
4
or to Quick Text and press the Menu Select button directly below Sel for a
predefined message.
5 or to scroll through the list of messages and press the Menu Select button directly
below Sel to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6 Press the Menu Select button directly below Optn .
7
or to Send Message and press the Menu Select button directly below Sel .
8 or to scroll through the address list and select the required address.
The message is sent after the address is selected.
6.13.2
Priority Status and Request Reply of a New Text Message
Before sending your message, you can append a priority status and/or a request reply to your
message.
6.13.2.1
Appending a Priority Status to a Text Message
When and where to use:
NOTICE: The Priority Status icon on a message does not imply that the message gets higher
priority over the other messages when it is being transmitted. It is just an indication that can be
embedded into a message to let the receiver know that the message is important.
Procedure:
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu Select button directly below Sel to
indicate that the message is important.
The priority status icon appears beside the normal message icon on the label bar.
6.13.2.2
Removing a Priority Status from a Text Message
Procedure:
1 Press the Menu Select button directly below Optn .
2
or to Mark as Normal and press the Menu Select button directly below Sel to
remove the priority status from the message.
The display shows the normal message icon on the label bar.
6.13.2.3
Appending a Request Reply to a Text Message
Procedure:
1 Press the Menu Select button directly below Optn .
MN004863A01-AG
Chapter 6: Advanced Features
64
To Next Page
Loading...
