NOTICE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent
folder. The next user is able to access the Inbox, Draft, and Sent messages if private data is
not deleted.
Procedure:
1 Press the Menu Select button directly below Logt.
One of the following scenarios will occur:
• The display shows Clear private data?. Proceed to the next step.
• If the Delete Messages On Session End feature is enabled, the radio clears the private data
and returns to User Login screen.
2 Perform one of the following actions:
• Select Yes to clear all your private data. The display shows Private data cleared.
• Select No to keep your private data.
6.13
Text Messaging Service
Text Messaging Service (TMS) allows you to send and receive messages and run database queries
directly from your radios. The maximum number of characters allowed for a text message is 200
characters.
The types of text messages available are:
• A predefined message (quick text message).
• An edited quick text message.
• A query (ASTRO 25 Advanced Messaging Solution).
NOTICE: Query is only supported in the ASTRO 25 Advanced Messaging Solution. For more
information, see ASTRO 25 Advanced Messaging Solution on page 68 and Two-Factor
Authentication on page 68.
6.13.1
Sending a Quick Text Message
When and where to use:
Quick Text messages are messages that are predefined and usually consist of messages that are
used most frequently.
Each Quick Text message has a maximum length of 50 characters. You can select the required text
from the Quick Text.
Procedure:
1 Perform one of the following actions:
• To access this feature using the preprogrammed button, press the preprogrammed Quick
Text button and proceed to step 4.
• To access this feature using the menu, proceed to the next step.
2 or to TMS and press the Menu Select button directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
MN004863A01-AG
Chapter 6: Advanced Features
63
To Next Page
Loading...
